GRAFTING TOOL Gunting Grafting Alat Potong Sambung

Grafting Tool untuk mempermudah anda dalam memperbanyak bibit tanaman dengan sambung pucuk dan okulasi. 

Hasil Grafting Rapi dan Presisi jadi memperbesar kemungkinan untuk berhasil.
Features: 

Rootstock and scion it is easy to match the U-cut,V-cut or Ω-cut,rapid healing

Using easily and fastly. Grafting method than the traditional savings

The time and effort Blade can be replaced

Use the pruner to cut useless branches from the plant


Specification:
For the knife
Materials : carbon steel, ABS and Aluminum
Color black
Cut grafting stocks from 5mm up to 1.4cm diameter
Trimming blades 3mm thick
Phillips screwdriver with red handle
Size 27*10 cm/10.5*3.9inch
(1cm=0.39Inches) 
A wrench
2 additional blades
A black bag



How to use: 

Step 1: Hold the grafting stock in the grafting tool and squeeze the handle to make the cut, repeat this step to cut stem from the donor plant. Take care to ensure that the groove is cut in the stock plant. Step 2: Slide the donor stem into the groove of the stock plant, matching the cut surfaces as closely as possible. If the stock and donor plant are not the same size, match on the side only. Step 3: Place sterlizing material around the joint, and bind with tape, the sterilizing material will protect against bacteria and weather conditions. Step 4: Use the pruner to cut useless branches from the plant. Step 5: The grafting tool with "V & U & Ω" blade and the end of blade both can cut, one piece blade can be used as two pieces blade, so you would have total six pieces blade.